The PriLite Marlin is fast, well-tracking and lightweight seakayak!
It’s elegant, stretched lines make it an ideal boat for travelling. Safe forward gliding, fast changes in direction using the edges of the boat, everything can be done in a safe and precise manner. Flat angles on the lateral areas make the boat very manageable and provide an optimum of stability.
Shiny! Our MARLIN in the colours of green, orange and mother-of-pearl-white (new) are especially eye-catching due to their metallic effect.
For PriLite boats, the ABS-combination plates, sealed with UV-resistant perspex, are pulled into the hot moulds, which have a temperature of approximately 80 degrees, in a computerized process, using heat and vacuum. The upper and lower parts of the boat are inseparably joined together by a double-sided U-proﬁle. This proﬁle additionally strengthens the sides of the kayak against impact. The mounting of deck mountings and interior ﬁttings are thoroughly done by hand, as on all Prijon boats. Advantages: PriLite boats are approx. 20% lighter than comparable kayaks made of HTP. At the same time there is a clear advantage regarding stability compared to GFK or Carbon/Aramide.
Repairs/Care: Supeficial scratches can be polished off with a special XERAPOL paste, available in specialized shops. Larger repairs are made with Epoxi. The inside of the boat should not be permanently exposed to sun (store upside down!).
+ Lighter than HTP
+ More sturdy than GRP/Carbon Aramide
+ Optical highlight because of the metallic surface
- More susceptible to mechanical stress than HTP
MADE IN EUROPE
- Material PRILITE
- Length 530 cm
- Width 58 cm
- Weight 23 kg
- Cockpit 3 (88cm)
- Volume 375 Liter
- Capacity 140 kg
- Paddlerweight 80-115 kg
Storage front 58 Liter
Storage back 122 Liter
Complete with rudder system installed.